Saving and Loading PanelView Applications from an ATA disk.

BY Steven Eckwielen, November 1999

Saving the PanelView application to the ATA:

  1. via a laptop
    1. Insert ATA disk into Laptop
    2. Copy the .PVA file to the root directory of the ATA disk.
  2. via a PanelView
    1. Insert ATA disk into PanelView (PanelView can be running or off)
    2. To enter the configuration screen
      1. KeyPad PanelView press the left and right arrow keys at the same time
      2. Touchscreen PanelView find the button labeled “Goto Config Screen”. I can’t tell you where to find it, that is if you can find it at all, since it can vary from project to project.
    3. Scroll and select “Memory Card”

Loading the PanelView Application from the ATA to the PanelView:

  1. Insert ATA disk into PanelView (PanelView can be running or off)
  2. To enter the configuration screen
    1. NON-Touchscreen PanelView press the left and right arrow keys at the same time
    2. Touchscreen PanelView find the button labeled “Goto Config Screen”. I can’t tell you where to find it, that is if you can find it at all, since it can vary from project to project.
  3. Scroll and select “Memory Card”
  4. Choose “Memory Card Listing” and view the listings of files on the card. There can be more than one PanelView file available.
  5. Select the desired filename from the card
  6. Choose “Restore from Card”
  7. After the download has completed you can remove the ATA card, if desired.
    1. PanelView OFF – remove the ATA card
    2. PanelView ON – press “Disconnect Card” and remove the ATA card.